Some folks online say Brunt boots are a scam or not worth the hype. I’ve seen those comments too, and honestly, that’s a whole conversation of its own.
But if you’re already looking into Brunt boots, you’ve probably decided to give them a shot, despite the noise.
So let’s park that drama for now and focus on Brunt boots sizing.
Because if there’s one thing worse than buying boots you’re not sure about, it’s buying the wrong size and having to deal with returns, or boots that just don’t feel right.
I’ll walk you through everything you need to know about Brunt sizing, what to expect, how they compare to other brands, and how to get the right fit the first time.
Brunt Boots Sizing
Now, do Brunt boots fit true to size?
Kind of, but not exactly. Brunt says their boots are true to size, but I’d say they run about a half-size bigger than sneakers or dress shoes.
That’s not unusual for work boots, especially if you’ve worn Red Wings, Wolverines, or Danners before. It’s the same ballpark.
Here’s what I think:
If you normally wear a 10.5 in sneakers or running shoes, try a 10 in Brunts. That’ll probably get you the right fit without feeling sloppy or tight. I always recommend starting with the most common size in your closet and then going down half a size from that.
What If You Already Wear Boots?
View this post on Instagram
If you’ve worn other work boots before, like Red Wing, Timberland, Thorogood, or Wolverine, you’re in luck. Brunt boots fit pretty close to those. So if you already know your size in one of those brands, you can probably just match it here.
Example:
I wear a 9.5 in Red Wings, and the same size works well in Brunts. No surprises there.
The Hidden Sizing Hack: Brunt’s Adjustable Width System
View this post on Instagram
Okay, this part is actually pretty clever. Brunt boots come with a little built-in trick that most people miss: their Adjustable Width System.
Here’s how it works:
- Every pair comes with a triple-layer insole setup.
- If your boots feel snug, just pull out the insole.
- Under that, there’s another insert—take that out too.
- Then, pop the top insole back in and make sure it sits flush at the front and back.
Boom, you just turned your boot from a standard D width to something closer to an E or E+.
It’s not exactly the same as ordering a wide size, but it gives your foot more breathing room without needing a different pair.
Have you ever had a boot that almost fit, like, just barely too tight across the midfoot? This solves that without you needing to send anything back.
Related:
For a completely different fit philosophy, especially one that molds around your foot over time, take a look at this detailed Russell Moccasin sizing guide.
Available Sizes: What You Can Get
View this post on Instagram
Brunt keeps it simple:
- Sizes go from 7 to 14.
- Half sizes are available between 8 and 11.
- There’s no wide size option on the site, but thanks to that Adjustable Width System, you get a bit of flexibility built in.
Not Sure What to Order?
Here’s my quick cheat sheet:
- Coming from sneakers or dress shoes? Go down half a size.
- Already wear Red Wing or Timberland? Stick with that size.
- Boots feel tight when you try them on? Remove the lower insole for a looser fit.
- Still not sure? Try two sizes and keep the one that feels best. Brunt has a solid return policy, so it’s low risk.
Ready to break it down further? Let’s take a closer look at the full Brunt boot size chart so you can zero in on your best fit….
Brunts Boots Size Chart
| US Men's | US Women's | UK | EU |
|---|---|---|---|
| 7 | 8.5 | 6 | 39.5 |
| 8 | 9.5 | 7 | 40.5 |
| 8.5 | 10 | 7.5 | 41 |
| 9 | 10.5 | 8 | 42 |
| 9.5 | 11 | 8.5 | 42.5 |
| 10 | 11.5 | 9 | 43 |
| 10.5 | 12 | 9.5 | 44 |
| 11 | 12.5 | 10 | 44.5 |
| 11.5 | 13 | 10.5 | 45 |
| 12 | 13.5 | 11 | 46 |
| 13 | 14.5 | 12 | 47 |
| 14 | 15.5 | 13 | 47.5 |
How to Measure Your Feet for Brunt Boots
Most sizing problems happen because we think we know our foot size, but we’re actually off by half a size or more. Measuring your feet takes like two minutes, and it can save you a return.
Here’s the easy way to do it at home:
What you need:
- A sheet of paper
- A pen or pencil
- A ruler or measuring tape
- Your socks (yes, wear the socks you plan to wear with the boots)
Step-by-step:
- Place the paper on the floor, up against a wall.
- Stand on it with your heel touching the wall.
- Trace your foot—just the outline. Try not to cheat by leaning forward or angling your pencil.
- Measure from the heel to the longest toe. That’s your foot length.
- Repeat for your other foot. (Don’t skip this—most of us have one foot that’s a bit longer.)
Now, take that length and compare it to Brunt’s sizing chart on their site. If your foot is, say, 10.25 inches long, check what size that lines up with. And remember, Brunt boots run about a half-size big compared to sneakers. So if you’re in between sizes, I’d go with the smaller one.
By the way…
This trick works best if you’re standing while measuring. Your foot spreads out when you stand, so you get a more accurate read than if you’re sitting. And yeah, it really does make a difference.
A Bit of Brunt’s Backstory
Brunt started in 2019, founded by Eric Girouard (and David Chernow) in Massachusetts. Eric was inspired by friends in the trades; people who needed tough, no-nonsense footwear that didn’t cost an arm and a leg.
They officially launched boots in 2020, so they’re pretty new compared to old-school brands like Red Wing or Thorogood.
Even though Brunt is American-born and headquartered in North Reading, Massachusetts, their boots come from Jinjiang, China, a major shoemaking hub.
They do design, testing, and material sourcing in the U.S., and take advantage of China’s skilled manufacturing setup and affordable labor.
Despite being new, Brunt has grown quickly, pulling in around $25 million in revenue in 2021 and raising over $40 million in funding from firms like Stripes and Suffolk Technologies.
Brunt claims they care about fair-trade practices and sustainable sourcing. But details are thin, and some experts question how deep that commitment really goes.
Because they’re new and not made in the U.S., some folks question Brunt’s quality and longevity. There are mixed reviews out there. But understanding who’s behind the brand and how they build their boots helps make sense of what you’re buying, especially if you’re sizing up your expectations (pun intended 😉).
Final Thoughts
Brunt boots don’t run weird or wildly off. They’re just more in line with work boot sizing than sneaker sizing. Once you get your head around that, it’s pretty easy to figure out your size.
And hey, if you’re still wondering whether Brunt boots live up to the marketing, that’s a different rabbit hole. But sizing-wise, you’ve got options, and they’ve built in some thoughtful ways to help you dial in the fit.
So, what do you think? Have you tried Brunts already, or are you still on the fence? How did you find Brunt boots sizing?
Drop your sizing wins (or disasters) in the comments if you’ve got stories. We’ve all been there.