I’ve always had a soft spot for small, upcoming boot brands that actually care about what they’re building.
The kind brands that don’t chase hype, don’t pump out mass-market junk, and don’t disappear after a season.
Craft & Glory falls right into that category. They remind me a bit of Christian Daniel and Cordobes. These brands came out of nowhere, stayed focused on quality, and earned people’s trust one pair at a time.
Craft & Glory builds boots with real intention. Boots that feel made for everyday life, not just photos on Instagram.
And if you’ve been around this world long enough, you start to appreciate companies that still answer emails like real human beings.
In this guide, we’re going to go through everything you need to know about Craft And Glory sizing.
I’ll break down how their sizing works across different models, how their boots compare to other brands, and which shape might work best for your feet.
I’ll also show you how to measure your feet the right way and how to get accurate sizing help from them before you order.
Let’s dive right into it…
Craft And Glory Sizing
View this post on Instagram
Key Takeaways: Craft & Glory Sizing:
- Craft & Glory boots mostly fit true to size.
- If you know your exact size, chances are you’ll land in the same size with Craft & Glory.
- Heel-to-ball fit lines up well with Brannock sizing.
- Their boots tend to have a roomy forefoot and comfortable instep, so even slightly wide feet should be fine in D width.
- Expect a little extra length in some models like the hiking boot, but it doesn’t affect the fit once laced properly.
- Gurkha boots run a bit wider.
- Between sizes or unsure? Email them before you order.
- Their sizing is consistent across models.
If you want a quick shortcut: Go with your usual EU size or your Brannock size in US/UK, and you’ll probably be fine. If in doubt, message them your measurements. They take sizing seriously and actually help.
Related: If you want more boot sizing tips, check out my Georgia Boot sizing guide. These are perfect if you’ve ever struggled with heel slip or tight toes.
Craft & Glory Size Chart
Craft & Glory boots generally fit true to size, but the brand still recommends measuring your feet in centimeters before placing an order.
I think that’s smart advice because it helps, especially if you’re between sizes or unsure how their lasts might feel on your feet.
Men
| US Size | UK Size | EU Size | CM |
|---|---|---|---|
| 7 | 6 | 40 | 25.1 |
| 7.5 | 6.5 | 40.5 | 25.4 |
| 8 | 7 | 41 | 25.8 |
| 8.5 | 7.5 | 41.5 | 26.1 |
| 9 | 8 | 42 | 26.7 |
| 9.5 | 8.5 | 42.5 | 27.3 |
| 10 | 9 | 43 | 27.7 |
| 10.5 | 9.5 | 43.5 | 27.9 |
| 11 | 10 | 44 | 28.6 |
| 11.5 | 10.5 | 44.5 | 29.2 |
| 12 | 11 | 45 | 29.5 |
| 12.5 | 11.5 | 45.5 | 29.8 |
| 13 | 12 | 46 | 30 |
Related: Red Wing Size Chart
Women
| US Size | UK Size | EU Size | CM |
|---|---|---|---|
| 4 | 3 | 36 | 23.2 |
| 5 | 4 | 37 | 24.1 |
| 6 | 5 | 38 | 24.4 |
| 7 | 7 | 39 | 25.2 |
| 8 | 8 | 40 | 25.5 |
| 9 | 8.5 | 41 | 26.1 |
Related: Thorogood Size Chart
Craft & Glory Hiking Boots Sizing
View this post on Instagram
Craft & Glory says their hiking boots run true to size, and for the most part, that checks out.
On the Brannock, I measure a US 9. That usually puts me at a UK 8 or around a 42 in European sizing. According to their size chart, that means I should be a US 9, and that’s what I went for.
But here’s the interesting part. After placing my order, they actually emailed me and asked me to measure my feet.
I’m not sure if that’s something they do for everyone, but if it is, I’d definitely recommend doing it. It’s a nice touch and shows they care about getting the fit right.
In fact, when I reached out with foot tracings and measurements, they replied quickly and confirmed that a US 9D, UK 8, and EU 42 would be the best match, all true to my Brannock size.
When the boots arrived, they felt just a bit roomy. Not huge, but enough that I thought I probably could have gone with an 8.5 US.
I’d say if you’re a 9E Brannock, you’ll still be fine going with a 9D in these. The forefoot has good space, and the instep feels comfortable, even for those with a higher arch.
I fixed the extra room easily. I swapped out the leather insole for a thicker comfort one, and that filled the space nicely.
Ignoring that little bit of extra room, the fit feels great. The heel doesn’t exactly lock down like a ski boot, but once I cinch the laces tight through the D-rings, it stays put with no slipping.
The forefoot has enough width that I don’t get hot spots where I usually do, right under the ball of my foot.
Lengthwise, heel to ball feels perfect, and heel to toe runs just a hair long, but not enough to bother me. In fact, I prefer it that way since the heel-to-ball fit is what really matters.
Again, I wear a 9D Brannock, usually an 8.5D in most US-made boots, and a UK 8. My Craft & Glory in size 42 fit just right, especially compared to my Fracaps, which are a size 43 and about a half size longer.
Whenever I stick with 42 on the European scale, I seem to hit the sweet spot every time.
So, if your usual size in EU 42 / US 9 / UK 8 combo fits you well, you’ll probably feel right at home with Craft & Glory hiking boots.
Next up, let’s talk about the Craft & Glory Engineer Boot—because that one fits a little differently, and it’s worth paying attention to if you’re thinking about getting both.
Next up, let’s talk about the Craft & Glory Engineer Boot because that one fits a little differently, and it’s worth paying attention to if you’re thinking about getting both.
Related: Curious about another comfortable, easy-to-fit brand? Take a look at my Astorflex sizing guide.
Craft & Glory Engineer Boot Sizing
View this post on Instagram
Again, I’m a US 9D on the Brannock, and I usually wear an 8.5 in most American boot brands like Red Wing, Thursday Boots, and Truman Boots.
In UK sizing, I’m an 8, which also matches what I wear in Tricker’s and Crown Northampton.
Now, according to Craft & Glory’s website, my size should be a US 9 or EU 42, and that’s exactly what my pair says inside the boot: UK 8 and EU 42.
I like it when brands keep those conversions consistent because that lineup, UK 8, US 8.5, EU 42, always gives me that “this is going to fit right” kind of confidence.
When I slipped them on, that’s exactly how they felt. The fit is true to size, and I didn’t need to size up or down.
Craft & Glory has never sized me wrong. I’m a pretty straightforward fit, and they nailed it again with the Engineer Boot.
I went with the standard D width, even though my foot leans a bit on the wider side, and these still felt perfect.
The forefoot has enough space without feeling sloppy, and the instep doesn’t pinch or rub. If you’re someone who’s between a D and an E width, I think you’ll still be fine sticking with the D in this boot.
What I like about the Engineer Boot is that it keeps that same comfort balance as the hiking model, but the fit feels slightly more secure around the ankle and midfoot.
There’s no lace system to tweak, of course, but once you break them in, they mold nicely to your shape.
So, if you already know your usual UK, EU, or US boot size, finding your fit here should be pretty intuitive. Just go with your regular size and width, and you’ll probably end up with the same easy fit I did.
Related: If you like how Craft & Glory boots fit, you might also want to check out my Bordon sizing guide. Their sizing feels pretty similar, though Bordon tends to have a bit more volume in the toe and a snugger heel.
Craft & Glory Gurkha Sizing
Their website lists sizes in US measurements, but as I’ve learned, it’s worth double-checking with them before ordering.
Again, I’m a US 9D on the Brannock device, which usually translates to a pretty standard fit across most brands.
But after I sent them my measurements and a few details about how other boots fit me, they recommended a US 8.5 in what they called a 2E width.
Now, whether it’s truly a EE or just a generous last, I can’t say for sure, but it definitely feels wider than a normal D.
The fit feels really good. It’s not as snug as some of my boots, but it’s easily one of the most comfortable pairs I’ve worn from them.
Sometimes that little extra width makes all the difference, especially when you’re walking around all day.
So, here’s my advice: email them before you order. They’re quick to respond and surprisingly accurate with their recommendations. When you actually talk to them about how you like your boots to fit, they seem to get it right.
In my 8.5 EE, the heel-to-toe length feels spot on, and the heel-to-ball alignment is just right. The forefoot has enough space to feel easy without being sloppy, and the heel and waist stay locked in nicely.
The bump toe gives the front plenty of volume, which helps with comfort across the top of the foot and up through the instep.
If I had to nitpick, I’d say the round toe shape feels slightly less anatomical inside. My big toe occasionally rubs a bit along the inner wall of the toe box. It’s not painful, but it’s noticeable at times, especially when I’m wearing thinner socks.
Still, overall, the fit works really well for me. The Gurkha feels roomy in all the right places without feeling oversized.
If you’re somewhere between widths or usually find standard D fits a little tight, you’ll probably appreciate the extra room here.
Related: If you like Craft & Glory for their thoughtful sizing and quality, you might want to check out Caswell boots too. Both brands put a lot of care into their lasts and materials, so you can expect a similar attention to fit and comfort.
Craft & Glory vs. BlkBrd
View this post on Instagram
I think you’ll agree with me that these two models really show what each brand stands for.
BlkBrd leans into the elegant, slim-lasted side of bootmaking, which is the kind of refined European or English-inspired style that wouldn’t look out of place next to something from Crockett & Jones.
Craft & Glory, on the other hand, sits firmly in the rugged, American-inspired camp. Their boots have that sturdy, wider last and rounder toe box that remind me a lot of classic work or service boots like the Iron Ranger.
The BlkBrd Luchador, for example, is a classy derby boot that feels unapologetically English in shape and proportion.
The almond toe, the neat lines, and that pebble-grain leather all scream “dress boot,” but without trying too hard.
Some people like to say it’s baically a copy of the Crockett & Jones Coniston, but I think that’s a bit unfair.
The resemblance comes more from the shared design language, or the same traditional English DNA, not because BlkBrd copied anyone’s homework.
Now, compare that to something like the Gurkha from Craft & Glory. This one clearly takes cues from the Pacific Northwest boot scene, like White’s MP or even early Viberg influences.
You can see it right away in the thicker sole, the commando-style traction, and that fuller, rounder cap toe with a bit of a bump. It’s built with more volume, more presence, and honestly, a more workwear personality.
So, while BlkBrd aims for slimmer lines, more polish, and a sharper silhouette, Craft & Glory brings that field-ready, workshop feel.
They’re both well-made, but they speak different design languages. One’s about finesse, the other about function.
Related: If you like that classic English craftsmanship, check out Crown Northampton sizing guide. Both brands value quality and detail, but Crown’s fit leans more refined and structured, while Craft & Glory shoes have a touch more give once the leather softens.
Brand Overview: Craft & Glory
View this post on Instagram
What surprised me the most is that about three-quarters of Craft & Glory’s sales actually come from within India. I didn’t expect that.
You always hear about heritage-style boot enthusiasm happening in Japan or Indonesia, but I had no idea the same kind of movement was picking up in India, too. And that’s honestly very cool to see.
India has a long tradition of making high-quality leather goods. The country has been tanning leather for centuries, supplying the British during the colonial era with hides for boots, belts, and military gear.
It’s the same kind of story you find in Indonesia, where the Dutch left behind a strong bootmaking legacy that local craftsmen developed into their own scene.
In India, that heritage took root in factories that now produce shoes for brands like Adidas, Puma, and Reebok.
Some English bootmakers even have their second-tier lines produced in India. You could say India is to the UK what Mexico is to the US when it comes to manufacturing.
Craft & Glory was founded in the mid-2010s by Rohit and Nitika Anand in Gurugram, a city just outside Delhi.
They started small, bringing together a team of skilled artisans from around the region to make rugged, everyday leather goods by hand. Their early products were mostly bags, jackets, and accessories, all built with durability in mind.
Eventually, they moved into boots and shoes inspired by classic American workwear styles. They began selling through their brick-and-mortar store in Delhi and later expanded online as their international following grew.
Most of their boots are described as Goodyear welted, but they’re actually hand-welted. Instead of using a glued-on canvas gemming to attach the upper to the insole, they carve a flap directly out of the insole itself and stitch through that.
It’s a more traditional and time-intensive method that results in a stronger build.
Their boots are often made from Asian water buffalo leather, which is known for its toughness and character.
Production is still relatively small-scale, but turnaround times are surprisingly fast, typically two to three weeks for a made-to-order pair.
On their website, they say they draw inspiration from a time when goods were made for purpose, not for fashion.
That pretty much sums up their philosophy: functional, minimalist, and built to last, like a pair of Levi’s jeans made for work rather than show.
Related: To see sizing across different models, check Dievier sizing.
How to Measure Your Feet for Craft & Glory
View this post on Instagram
If you want your Craft & Glory boots to fit right the first time, do this before you order. Good measurements save you from returns, toe pain, and clunky heel slip.
Step 1: If You Can, Get Measured by a Pro
The best move is to walk into a local shoe or boot store and ask for a Brannock measurement. It’s quick and accurate.
- A pro measures length, width, and arch length (heel-to-ball).
- They also look at your instep height and overall foot shape.
This matters because boots don’t just fit based on length. Your arch position and instep height affect comfort more than you think.
If you’ve never done this before, it’s worth the five minutes. You’ll walk out knowing your true size instead of guessing.
Step 2: Use a Brannock Device at Home (If You Have One)
If you already own a Brannock or can borrow one, use it. It’s still the standard in footwear fitting.
- Stand on it with socks similar to what you’ll wear with your boots.
- Put your weight evenly on both feet.
Record:
- Heel-to-toe length (US/UK size)
- Heel-to-ball length (arch length)
- Width (D, E, EE, etc.)
- Measure both feet. One is often bigger, and you should size based on the larger foot.
Craft & Glory uses Brannock info when giving sizing advice, so this is the fastest way to get a solid recommendation.
Step 3: Pen-and-Paper Method (If You Don’t Have Brannock Access)
This one is simple and Craft & Glory actually asks for it sometimes.
- Put a sheet of paper on the floor against a wall.
- Stand on it with your heel against the wall.
- Trace around your foot with a pen held straight up.
Measure:
- Length: heel to longest toe.
- Width: widest point across the ball of the foot.
- Do both feet.
- Take photos of your tracings and measurements (optional but important)
This method isn’t as precise as a Brannock, but it gives them enough data to guide you toward the right size.
Don’t Forget: Instep and Foot Shape Matter
When you email Craft & Glory, tell them about your foot shape:
- High instep → you may need more volume.
- Wide forefoot → you may need extra width.
- Narrow heels → ask about heel lock.
- Orthotics or insoles → mention them so you don’t get a size that ends up too tight.
A simple message like this works:
“I’m a 9D Brannock, slightly wide forefoot, medium instep. I prefer a snug heel and relaxed toe box.”
Pro Tips
- Measure at the end of the day when your feet are slightly swollen.
- Wear the socks you’ll use with your boots when measuring.
- Stand, don’t sit while measuring. Feet spread under weight.
- Send Craft & Glory your length, width, instep notes, and even photos.
Final Thoughts:
I’ll be honest with you, Craft & Glory surprised me.
Before I tried them, I didn’t expect this level of fit consistency from a smaller brand, especially one doing made-to-order boots.
But after going through a few models and swapping sizing notes with them, I get it now. They actually care about getting the fit right, and you feel that when you wear their boots.
If you take one thing from this, let it be this: measure your feet, know your Brannock numbers, and send them your details. They’re responsive and they’ll help you choose the right size.
I also think Craft & Glory is a good fit for people who like function more than fashion. Their lasts are comfortable, their sizing makes sense, and there’s enough room in the forefoot that you don’t feel cramped after a long day.
If you’ve got slightly wide feet or hate narrow dress boot lasts, I think you’ll get along with them.
So here’s my take on Craft And Glory sizing: if you stick with your usual size and give them your measurements, you’re going to be fine.
And if you’re unsure, just message them. They’re easier to talk to than most big boot companies.
Anyway, that’s how I see it. If you end up getting a pair, I’d actually love to hear how the fit worked out for you.
Did you go true to size or tweak it? Let me know.